Charging controller is an automatic DC current device that controls and manages DC power. It can modulate or boost the DC input and give out constant amount of required DC out put current and it manages the storage and utilization of current. The flow of DC current produced from SOLAR power or WIND power are not at a constant level, it always vary with the availability of sunlight or the wind. The charging controller boosts the input current for charging and reduces the current when the current flow is excess and keep the voltage always at a constant level without losing any current. Let it be any other source that has a DC current source, the charging controller functions like a transformer and modulates the input and out put current and keep the current flow always at a constant level but without any power lose. Charging Controller can be used in DC electronic equipments for the smooth functioning of LED lightings ,DC fan , DC CFL, DC music systems , security camera, navigation equipments which is used in ships and bouts. It is an independent and economical Direct Current power supply for a whole house, house boats and ships with a separate dc wiring. It is an only ideal source of electric supply for places where there is no electricity like deserts. It has only an initial expense.

Normal inverter any brand using by KSEB can also be used solar energy based system by using recommended capacity of Flyline solar charge control and solar panel.

There are Three types of charging controllers available now, IGBT, MOSFET and MPPT charging controller .

MOSFET Pulse Width Modulation Solar Charging Controllers (PWM) Common Features

• The main advantage of Flyline Solar Charger is high efficient " Zero Drop" (we get 100 % efficiency).
• Comparing to MPPT, there is no heat conversion efficiency lose in this special model.
• German MPCT ( Maximum power converting technology ) Technology assures the quality of product.
• ISO 9001- 2015 certified Flyline Solar Charger.
• It is commonly used products.
• This charging controllers are used for smaller and medium power controlling units.
• The technical features are same with IGBT.
• The control system controls the whole system taking care of battery over charging cut off, deep discharging cut off, protections in battery reverse, PV reverse, Overload and Short circuit.
• Our product connection diagram printed on it.
• Micro controller based.
• LED, bar glass or LCD - display-battery voltage, load on/off, battery condition charging on/off.
• Up to 80 amp auto detection for 12v/24v and 24/36/48 V (automatic sensing).

FLYLINE PWM/MOSFET SOLAR CHARGER CONTROLLER TECHNICAL FEATURES
Switching	Zero drop back to back PWM  MOSFET base
Nominal battery voltage	12 V   to 48 V DC
Maximum out put amp	4AMP to 80 AMP
Stand by consumption	less than 1w
Charging REG	2  stage
Battery tem combination	5MV@40DIG
Product Display	LED or LCD
Max. panel  input voltage	20V@12V
Battery input	8 to15 Volt (for 12 V).19 to 30 Volt ( for 24 V)
Panel  input	10 to 40 Volt (for 24 V).
Battery input	32 to 60 Volt ( for 48 V)
Panel  input	40 to 80 Volt ( for 48 V)
Mobile charging	USB & DC SOCKET
DC LOAD	UN REGULATED

IGBT SOLAR CHARGING CONTROLLERS COMMON FEATURES

• It is used for high voltage regulations.
• German MPCT ( Maximum power converting technology ) Technology assures the quality of product..
• ISO 9001- 2008 certified
• Zero Drop model (we get 100 % efficiency).
• It is commonly used products.
• IGBT charging controllers are used for medium and higher power controlling units.
• The technical features of MOSFET and IGBT are same.
• The control system controls the whole system taking care of battery over charging cut off, deep discharging cut off, protections in battery reverse, PV reverse, overload and short circuit.
• Micro controller base.
• LCD display-battery voltage, load on/off, battery condition charging on/off.

FLYLINE PWM/IGBT  SOLAR CHARGER CONTROLLER TECHNICAL FEATURES
Switching	Zero drop Back to back PWM IGBT base
Nominal battery voltage	72V  to 240V DC
Maximum out put amp	50AMP-200 AMP
Stand by consumption	less than 1w
Product Display	LCD
Charging REG	2  stage
Battery tem combination	5MV@40DIG
Max. panel input voltage	120V@72V , 200 v@ 120 v,  400 v@240v.
Max. battery input Voltage	90 V@72V, 150v@120v, 300v @240v.
Ambient tem	25* to 150*
DC LOAD	UN REGULATED (Optional )
Tem compensation	+/- 5mv @40digree

MPPT ( maximum power point Tracker) charging controller

• In art of the solar MPPT (maximum power point Tracker) determine the ideal operating point via processor –controller algorithm .This Significantly of incident light and temperature.
• The control system controls the whole system taking care of battery over charging cut off, deep discharging cut off, Protections in Battery reverse, pv reverse, Overload and Short circuit.
• MPPT solar charger have a power to increases the photovoltaic array power yield.
• It is most suitable for smaller power applications.
• Micro controller base.
• LCD display-battery voltage, load on/off, battery condition charging on/off.

FLYLINE MPPT  SOLAR CHARGER CONTROLLER TECHNICAL FEATURES
Nominal battery voltage	12v to 48v dc
Maximum out put amp	40 to 80amp
Maximum solar array	2000 w @40 amp, 4000w@ 80 amp in 48 v
PV open CKT voltage	120v @48 v design
Stand by consumption	less than 2w
Charging REG	5 stage
Battery tem combination	5MV@40DIG
Switching method	Buck boost DC to DC converter
Maximum Efficiency	98%

Solar Charge Controller Images:- Click here

Renewable Energy Promotion Excellence Award : Click Here

Product Short Informative Videos:- Click here

Product Detailed Informative Videos:- Click here

Useful technical informative videos:- Click here

      

        

Quick Call : 09447366779, 09446822522 ,08281848484

MURICKENS GROUP

HO : KOTTAYAM - KADUTHURUTHY

BR : KOTTAYAM - CEMENT JUNCTION

ERNAKULAM - PALARIVATTAM

CHENGANNUR - KALLISSERY

Real estate cunsulting officials at U.S.A. (Texas & Newyork) & Bombay

Email : mg@murickens.com, murickans@gmail.com